fast charging and high discharging power 600V250Ah for electric mining trucks
System basic data
Cell type | NCM-18Ah | |
Standard case number | 8 MV-B +1PDU | |
Nominal voltage | 592V | |
Configuration | 160S14P | |
Nominal capacity | 252Ah | @25℃，±5% |
Nominal energy | 149.18Kwh | |
Max constant charging current | 400A | With 2 GB charging plugs |
Max constant discharging current rate | 500A | customized |
Discharge Cut-off Voltage | 432V | |
Upper cut-off voltage | 672V | |
Peak discharge Current (10s) | 800A | @25℃ |
Peak feed back Current (10s) | 800A | @25℃ |
SOC working range | 20%~100% | |
Working temperature range | Discharge : -20~55 ℃ Charging: 0~55 ℃ | @ low and high temperature the current should be decreased. |
System Weight | ~1150Kg | |
BMS in built | yes | |
Bluetooth function | optional | |
GPS function | optional | |
CAN bus | optional | |
Life cycle | 4000times | @standard working state. 80%DOD |
Our battery is the best choice for replacing the oral engine with fast charging & long life cycle & safety&friendly environmental protection. Our factory have provided the batteries for 300+ mining trucks, they are working well at Tibet, inner Mongolia,etc. In the winter the temperature is around -30℃。
①The battery system can be full charged in 30mins;
② The battery system works with the VCU to charge with feedback current;
③The mining truck woks 8~14 route by charging 2-3 times;
④ The battery system supports 24hour working.
⑤ The cost will be save around 70% compare to original.
